M65 HydroClean
An industrial UAV cleaning platform built for exterior washing, high-structure cleaning, and specialized access work.
//
Category
Industrial Cleaning
// Introduction
Built for modern aerial cleaning operations, the M65 Cleaning Drone is engineered to deliver safe, efficient, and consistent performance in demanding environments. Its high-capacity cleaning system, stable flight control, and mission-focused design enable effective exterior cleaning for buildings, structures, and other hard-to-reach surfaces while supporting reliable day-to-day operational use.
Technical Specifications
Specification
Details
Dimensions (Folded)
1240 × 840 × 872 mm / 4 ft 1 in × 2 ft 9 in × 2 ft 10 in
Dimensions (Unfolded)
2919 × 3080 × 872 mm / 9 ft 7 in × 10 ft 1 in × 2 ft 10 in
Weight (excluding batteries)
34kg / 75 lb
Weight (including batteries)
49kg / 108 lb
Maximum Take-off Weight
111kg / 245 lb
Maximum Take-off Speed
15m/s / 33.5 mph
Obstacle Avoidance
Front and rear radar system with 2 sensors, supporting safe avoidance at ≥ 6.6 ft height and ≤ 18 mph speed.
Terrain-Following Radar
1 sensor, supports up to 45° gradient at flight speeds ≤ 4.5 mph
Camera System
FPV wide-angle anti-shake camera, 720p video, night flight lights
Remote Controller
UniRC 7, 7-inch 1080p 1600-nit display, 6 km / 3.7 mi range
Controller Details
2.400 to 2.476 GHz frequency, USB-C charging, 8 to 11 hours duration
Smart Battery
18S series lithium battery, 35,000 mAh capacity, 275 × 120 × 330 mm / 10.8 × 4.7 × 13.0 in, 15 kg / 33 lb, charging temperature -40°C to 65°C.
Smart Fast Charging System
Includes smart chargers with 100V to 240V input, 120A output, and 9000W rated power
Nozzle Positioning Module
The Nozzle Positioning Module allows operators to adjust the direction and angle of the pressure washer nozzle during cleaning operations. It improves spray control, surface coverage, and cleaning accuracy without requiring the aircraft to be repositioned.
Ground-Based Pressurization System
The Ground-Based Pressurization System supplies high-pressure water to the M65 Cleaning Drone through a connected hose, keeping the pressure unit on the ground so the drone stays lighter in flight. With up to 30 MPa / 300 bar / 4,350 PSI pressure, 32 L/min flow rate, and a 5500W induction motor, it delivers reliable cleaning performance for demanding exterior operations.
